[Open Source] PD65W GaN Charger (ACF), Based on DK8607AD, IP6538-AC-65W, XPM52CDP65
Open source a 65W PD fast charging GaN charger, based on DK8607AD power chip, Active Clamp Flyback (ACF) topology, IP6538-AC-65W + XPM52CDP65. Downloa
[Open Source] SC8703-Based Adjustable Buck-Boost DC/DC Power Supply | Voltage & Current Adjustable, PD Fast Charge Input Supported
An open-source buck-boost DC/DC module based on SC8703 accepts 2.7–36V input and outputs 1.21–36V with up to 10A, adjustable current limit, 600kHz switching, and 95.45% peak efficiency. It includes XT30 and Type-C PD input via CH224Q. Provided files: KiCad project, Gerbers, BOM, stencils, interactive BOM, and 3D models. Proper heatsinking is required; bare-board operation is recommended below 5A.
Magnetic Components/Magnetic Core Materials & Structures: Analysis, Comparison & Selection Guide
This article provides a systematic guide to magnetic core selection for power electronics, covering key parameters (permeability, saturation, core loss, Curie temperature), comparing materials like ferrite, sendust, permalloy, amorphous and nanocrystalline alloys, and reviewing core structures (EE, PQ, toroidal). It offers engineering recommendations for AC/DC, DC/DC, PFC, and inverter applications, emphasizing frequency matching, loss control, and cost balance. Engineers gain practical reference for choosing cores.
EG1164 High-Power Synchronous Rectification Boost Module Open Source with 97% Peak Efficiency
EG1164 High-Power Synchronous Rectification Boost Converter Module – Up to 97% Efficiency, Input Voltage 8~50V, Adjustable Output Voltage 8~60V, Maxim
EG1151 High-Power Synchronous Buck-Boost Power Module (Supports Type-C PD Fast Charging) Open Source
An open-source high-power adjustable buck-boost DC-DC module based on the EG1151 chip is introduced, using fully domestic components. It supports Type-C PD3.1 up to 48V, XT60, and DC5.5 inputs, up to 63V and 20A, with overcurrent and over-temperature protection. Measured peak efficiency is 96.8%, though sustained current is about 18A. Schematics, PCB files, and 3D-printed enclosure models are provided.